中文版
  • Home
  • Mould
  • Appearance Parts
  • Mechanical Parts
  • Transmission Parts
  • Knowledge Base
  • Contact Us
  • LCD Module
    >

Gear mould

As we all know, the mould is the most critical part in the gear injection molding process. A gear is a mechanical element that continuously meshes with gears on the rim to transmit motion and power. The application of gears in transmission appeared very early. At present, domestic gears are mainly used to transmit motion.

More

Worm mould

A worm refers to a gear with one or several helical teeth and meshing with the worm gear to form a crossed helical gear pair. The indexing surface can be a cylindrical surface, a conical surface or a torus surface.

More

POS machine mould

The POS machine cover is the shell of the POS. The POS machine cover is usually made of plastic material. In the process of producing the POS machine cover, an injection mold is usually used for production. Then the POS machine cover is used for the overall assembly of the POS machine.

More

Automotive center control panel mould

The central control panel of the car is the place to control the entertainment devices such as the car air conditioner and audio.

More

Tool handle mould

A tool handle is a common part used in various props and fixtures. Its quality requirementif that the surface of the handle need to be smooth without burrs or pits. The general production method of handle is to produce through the mold, the quality of the mold is directly related to the quality of the product. Generally the existing demoulding method is after opening the mold, the product is also placed in the lower mold core, and then through other means to remove the product from the lower mold core.

More

The remote control mould

Injection molding of remote control usually involves injecting molten plastic into the mold cavity and forming the required parts after cooling. When the ejection temperature is reached, the mold is opened and the parts are removed. Because the remote control has small size, side convex and concave structural characteristics, the existing injection mold should avoid because of unreasonable design, so that the finished product cavitation, weld marks, even warping deformation and other defects, resulting in low production efficiency and low product pass rate problems.

More

Printer structural parts mould

Printer shell plastic mold, using hot runner needle valve type 1 point to 2 points fan-shaped edge glue, product a mold a hole, the overall mold 2 inclined top, the overall mold is relatively simple, product thimble out. Our customers include Brother, OKI, Epson, etc. Our cooperation projects include more than 20 projects such as toner barrel, scraper and carton.

More

Camera mould

The camera is the basic equipment of security engineering. Generally, the camera shell includes a lower template and an upper template, which are molded by a mold. Our clients include Panasonic, Honeywell, Xiaomi and so on.

More

  • Prev
  • 1
  • Next

DONGGUAN YOUJIA PRECISION MOULD CO., LTD

No.28 Luobian Road, Hengli Town, Dongguan City, Guangdong Province, China

Tel: 0755-29166880
Link: 向日葵SEO 真空油炸机 倾角传感器 模块电源 清水混凝土
Home Project About Us Contact Admin
Copyright © 2022 东莞友嘉精密模具有限公司
粤ICP备2022020964号