As we all know, the mould is the most critical part in the gear injection molding process. A gear is a mechanical element that continuously meshes with gears on the rim to transmit motion and power. The application of gears in transmission appeared very early. At present, domestic gears are mainly used to transmit motion.
A worm refers to a gear with one or several helical teeth and meshing with the worm gear to form a crossed helical gear pair. The indexing surface can be a cylindrical surface, a conical surface or a torus surface.
POS machine mould
The POS machine cover is the shell of the POS. The POS machine cover is usually made of plastic material. In the process of producing the POS machine cover, an injection mold is usually used for production. Then the POS machine cover is used for the overall assembly of the POS machine.
Automotive center control panel mould
The central control panel of the car is the place to control the entertainment devices such as the car air conditioner and audio.
Tool handle mould
A tool handle is a common part used in various props and fixtures. Its quality requirementif that the surface of the handle need to be smooth without burrs or pits. The general production method of handle is to produce through the mold, the quality of the mold is directly related to the quality of the product. Generally the existing demoulding method is after opening the mold, the product is also placed in the lower mold core, and then through other means to remove the product from the lower mold core.
The remote control mould
Injection molding of remote control usually involves injecting molten plastic into the mold cavity and forming the required parts after cooling. When the ejection temperature is reached, the mold is opened and the parts are removed. Because the remote control has small size, side convex and concave structural characteristics, the existing injection mold should avoid because of unreasonable design, so that the finished product cavitation, weld marks, even warping deformation and other defects, resulting in low production efficiency and low product pass rate problems.
Printer structural parts mould
Printer shell plastic mold, using hot runner needle valve type 1 point to 2 points fan-shaped edge glue, product a mold a hole, the overall mold 2 inclined top, the overall mold is relatively simple, product thimble out. Our customers include Brother, OKI, Epson, etc. Our cooperation projects include more than 20 projects such as toner barrel, scraper and carton.
The camera is the basic equipment of security engineering. Generally, the camera shell includes a lower template and an upper template, which are molded by a mold. Our clients include Panasonic, Honeywell, Xiaomi and so on.