中文版
  • Home
  • Mould
  • Appearance Parts
  • Mechanical Parts
  • Transmission Parts
  • Knowledge Base
  • Contact Us
  • LCD Module
    >

Car slot

Slot also known as wire duct, wiring duct, line duct, etc., is an electrical tool used to organize and fix wire specifications such as power lines and data lines. According to different materials, there are many kinds of wire ducts, commonly used are environmentally friendly PVC wire ducts, halogen-free PPO wire ducts, halogen-free PC/ABS wire ducts, steel and aluminum and other metal wire ducts, etc.

More

Filter Net

Common materials for filters are: polyethylene (PE), polypropylene (PP), and polyamide (PA). Advantages: Corrosion resistance, low weight, increased filtration area, improved filtration efficiency

More

Two-color Accessories

Two-color accessory fittings inject two different materials into the same set of molds, so as to realize the molding process in which the injection-molded parts are formed of two materials. Some of the two materials are of different colors, and some are of different hardness and softness, thereby improving the aesthetics and assembly performance of the product. Conventional materials are ABS, PA6, PA66, PBT, PC. Injection molding machine are two-color injection machine

More

Plastic and iron integrated accessories

Plastic and metal integration are also called injection molding processing and plastic injection molding processing. Common raw materials: hardware parts are normally attributed to metal composite materials, stainless steel plates, red copper, aluminum alloy profiles, battery charging terminals,cables, steel wires, metal milling parts and other metal parts; some common raw materials for plastics are PC, ABS, PP, POM, TPE, TPU, PVC, PA66, PA6, PA46, hard glue, soft Adhesives, are widely used in all walks of life.

More

Plastic elbow, three-way, four-way structure

Elbow is a pipe fitting that changes the direction of the pipeline. According to the angle, there are three most commonly used ones: 45°, 90°, and 180°. In addition, other elbows such as 60° are also included according to engineering needs. Among them, the 90° ABS plastic elbow can be used for water supply, drainage pipe, tap water, pure water delivery pipe, air conditioning engineering piping, ice water system, seawater delivery pipe, fluid treatment etc.

More

Plastic trestle

Plastic trestle is mainly manufactured by the injection molding process. The principle is to add granular or powdery raw materials into the hopper of the injection machine, and the raw materials are heated and melted into a flowing state. The gating system enters the mold cavity, and hardens and shapes in the mold cavity. Factors affecting the quality of injection molding: injection pressure, injection time, injection temperature. Plastic molding is divided into horizontal injection molding, vertical injection molding, two-color injection molding, low pressure injection molding, etc.

More

Lock card, Latch

The lock card is a mechanism used for the embedded connection or integral locking of one part and another part, and is usually used for the connection of plastic parts, and its material is usually composed of a plastic material with certain flexibility. The biggest feature of the snap connection is that it is easy to install and disassemble, and it can be disassembled without tools.

More

Precision printer structural parts

There are three types of printers: dot matrix printers, inkjet printers, and laser printers. In line with the lightweight trend of printers, the outer shell of the printer is generally made of thermoplastics, and the general-purpose plastics used for ordinary printer shells are generally used in large quantities, with wide uses, good formability, and cheap plastics.

More

  • Prev
  • 1
  • Next

DONGGUAN YOUJIA PRECISION MOULD CO., LTD

No.28 Luobian Road, Hengli Town, Dongguan City, Guangdong Province, China

Tel: 0755-29166880
Link: 向日葵SEO 真空油炸机 倾角传感器 模块电源 清水混凝土
Home Project About Us Contact Admin
Copyright © 2022 东莞友嘉精密模具有限公司
粤ICP备2022020964号